IPP/WebCam Hard-Weld Camshafts
Stage 1 - 3 Camshafts
Chevy Cavalier 2.2, Pontiac Sunfire, Chevy S10 ('87-93 VIN 4)
ABOUT OUR CAMSHAFTS
We have an exclusive distributorship with Web-Cam (a
premier cam MFG in the US), and have designed a line of
cams for your Chevy Cavalier, Sunfire and S10 engine.
All cams have been designed for ABOVE STOCK
PERFORMANCE. These cams are designed to increase performance and
are for street on gas & Turbo's. With these cams you won't have to use shims, expensive buckets or lash caps!
REQUIREMENTS
** These are HARD WELD Cams with a Core
Required. (Download
the cam core worksheet to include with your shipment please)
** All cams require new Chilled
Flat Tappet Hydraulic Lifters
(USA Made).
** Stages 2 & 3 require 7500
Beehive Valve Spring Upgrade.
(Stage 1 does NOT
require spring replacement.)
(Why? Well, OEM valve springs can only handle so much valve lift before
they enter coil bind, where the spring has no more room
to compress. In other cases, the OEM valve spring cannot control
the valve properly, and valve float can occur. With a
performance or racing valve spring kit, there are fewer coils
(in most cases), and more room between the coils, allowing the
spring to compress more, and in turn allowing for more valve lift,
while keeping the valve under control).
** All clearances MUST be checked (such as:
springs, coil bind, pushrod lengths)
ADD-ONS
DTS2 Performance CNC Billet Aluminum
Lifter Guides (with more
room to allow for higher lift camshafts and stronger to provide
better lifter control especially at higher RPM's)
CUSTOM GRIND
We will custom grind these cams to your specifications.
Add only $20 to prices below, and give us a call to order!
Special Order only. Please call to order if you would like a Custom
Grind at 603.378.0090
WARRANTY
Our Webcam/IPP Camshafts are
warranted for 6 months only with the use of our
Beehive Springs.
(not warranteed if our proper
Beehive Springs are not
used).
(Note: The
figures below may vary slightly as cams have not been degreed in actual
motors at this time.)
IMPORTANT When PURCHASING
Adding Performance Flat Tappet
Hydraulic Lifters is
critial when purchasing these performance Cams. Not only will
these performance Lifters add additional
power, but lifters should always be changed out
when installing a new cam, as the stock ones are made in China
and do not last.
** Make
sure to DOWNLOAD
our worksheet to include w/your cam core shipment. ** |
