|
|
|
Cavalier, Ecotec, Sunfire & S10
Performance &
Custom Engine Parts |
Email Us
(985) 956-7009
| Order ONLINE Anytime! |
|
|
| Beehive
Springs |
Get up 6500-7500 RPM's with our Beehive Valve Springs!
For Chevy Cavalier 2.2, Pontiac Sunfire, Chevy S10 ('87-02 VIN 4)
(your OEM springs are only good for about 5600 RPM’s...
Get yourself an upgrade!)
Take a look at our Performance Beehive Springs. IPP has spent years in
developing performance cams for the 2.2 Cavalier. One of the most
important part of cam functions is the spring pressures. We have had a
lot of customers that have springs from Chevy V8, Fords & Chryslers -
both in single and double springs. The problem with this is two fold, 1)
the spring has to have the correct pressure and 2) the ability to not
coil bind at high lift.
If your spring does not have the correct pressure the valves will float
(= not allowing high RPM levels and loss of HP). If the spring is too
strong however, then it can ruin your cam lobes (another reason we offer
roller lifters made in USA, they are
stronger and less resistant to wear & tear).
If the spring has the incorrect coil bind then you can drop a retainer
and loose the complete engine!!! This is one of the reasons that we
warrantee our performance cam (or
cams that are reground for performance), only with the use of our
correct beehive springs. So buy right the first time and use the proper
springs for any performance cam, new
or reground.
(*Warrantee: our performance Webcam/IPP
Camshafts are warranted for 6 months with the use of our beehive
springs)
|
|
Beehive Spring Description |
RPM's |
Stage |
Part # |
Price/
Set (8) |
Order
Now |
Beehive Springs for use w/stage 1, 2, 3 and turbo if
desired.
OEM cavalier springs were designed for a 5800 RPM level
and start valve float at about 5600, this can be
eliminated with our new aftermarket springs with the
ability to reach up to 6500 RPM’s with no valve float. |
Up to
6500 RPM'S |
1, 2, 3,
& Turbo |
12-001 |
$69.99 |
|
Beehive Springs for use w/stage 2,3 and turbo if
desired.
OEM cavalier springs were designed for a 5800 RPM level
and start valve float at about 5600, this can be
eliminated with our new aftermarket springs with the
ability to reach up to 7500 RPM’s with no valve float. |
Up to
7500 RPM'S |
2, 3, & Turbo |
12-002 |
$109.99 |
|
|
| |
| |
|
|
| |
| |
|
|
HOME l
PERFORMANCE PARTS l
ENGINE
KITS l
CUSTOM PARTS l
AUTO RESOURCES l
CONTACT
Copyright 2010-2016
website design by
603 Design |
|
